Ultimate Guide to Kemtron 26 Steel Screen Replacement 2025

When it comes to maintaining your Kemtron 26 equipment, understanding the process of screen replacement is crucial for optimal performance. The Kemtron 26 steel screen replacement ensures durability and efficiency, filtering out unwanted debris and particles effectively. Below is the ultimate guide on how to carry out this important procedure.

For more information, please visit Kemtron 26 steel Screen Replacement.

1. Gather Necessary Tools and Materials

Before starting the replacement, ensure you have all required tools and materials on hand. This will streamline the process and minimize interruptions. You will need:

• A new Kemtron 26 steel screen
• Screwdriver set (flathead and Phillips)
• Wrench or socket set
• Gloves for protection
• Safety goggles
• Cleansing cloth

2. Ensure Safety Precautions

Safety should always be your top priority. Follow these precautions:

• Turn off all power sources to your equipment.
• Use gloves to protect your hands from sharp edges.
• Wear safety goggles to shield your eyes.

3. Remove the Old Screen

Now that you are prepared, it’s time to remove the old screen:

• Locate the mounting screws or bolts on the frame holding the screen in place.
• Use the appropriate screwdriver or wrench to remove these fasteners.
• Once removed, carefully pull out the old screen from the frame.

4. Clean the Frame

After removing the old screen, it’s essential to clean the frame thoroughly:

• Use a cleansing cloth to remove any debris or dust.
• Inspect for signs of wear or damage that may need addressing before installing the new screen.

5. Install the New Kemtron 26 Steel Screen

With the frame clean, you can now install the new screen:

• Align the new Kemtron 26 steel screen with the frame’s edges.
• Secure the screen in place using the screws or bolts removed earlier.
• Ensure the screen is tightly fitted to prevent any gaps that could allow debris to pass through.

6. Test the Installation

After the installation is complete, it’s time to test your work:

• Restore power to the equipment.
• Run the machine for a short period to ensure everything functions smoothly.
• Check for any unusual noises or vibrations which could indicate improper installation.

7. Maintain Regular Check-Ups

Lastly, to ensure long-term performance, make regular checks on the screen's condition:

• Schedule routine inspections to look for signs of wear.
• Clean the screen regularly to maintain its filtering efficiency.
• Replace the screen whenever necessary to keep your equipment running optimally.

By following this guide, performing the Kemtron 26 steel screen replacement will be a straightforward task, allowing you to maintain your equipment with ease and efficiency.

If you are looking for more details, kindly visit DFE Shale Shaker Screen.